Intergard 345 product data sheet

Lm1281n datasheets

Page 3 of 4 Intergard 345 Epoxy D ADDITIONAL Further information regarding industry standards, terms and abbreviations used in this data sheet can be found in the following documents available at www.international-pc.com: et INFORMATION ai Definitions & Abbreviations l T Surface Preparation o Paint Application p Theoretical & Practical Coverage Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. The information in this data sheet is not intended to be exhaustive; any person using the product for any purpose other than that specifically recommended in this data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at their own risk. manufacturer's respiratory protection products. 3M does not endorse the accuracy of the information contained in this Material Safety Data Sheet. Eyes: Do not get in eyes. Protective equipment should be selected to provide protection from exposure to the chemicals listed in Section 2 of this document. 1.1. Product identifier Product Identity INTERGARD 345 PART B Bulk Sales Reference No. AAA046 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended Use See Technical Data Sheet. Application Method See Technical Data Sheet. 1.3. Details of the supplier of the safety data sheet Company Name International ...
 

Amoxicillin fact sheet

NEWBUILDING/MAJOR REFURBISHMENT (Steel) Intergard 251 should be applied directly to AS1627.4 class 2.5 surface where practical. If a holding primer is required for progressive work Intergard 269 may be used. Keep within the specified overcoating intervals (consult the relevant product data sheet). Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. 1.1. Product identifier Product Identity INTERGARD 345 PART B Bulk Sales Reference No. AAA046 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended Use See Technical Data Sheet. Application Method See Technical Data Sheet. 1.3. Details of the supplier of the safety data sheet Company Name International ... Intergard 740 should always be applied over a recommended primer coating scheme. The primer surface should be dry and free from all contamination, and Intergard 740 must be applied within the overcoating intervals specified (consult the relevant product data sheet).Areas of breakdown, damage etc., should be prepared to the specified This product will not cure adequately below 41°F (5°C). For maximum performance ambient curing temperatures should be above 50°F (10°C). Surface temperature must always be a minimum of 5°F (3°C) above dew point. When applying Intergard 345 in confined spaces, ensure adequate ventilation. with the supply of products are subject to our standard conditions of sale. Intergard 475HS has been formulated to accommodate the trend towards environmentally responsible coatings whilst not compromising the overall cost of the coating system. The high solids formulation allows the application of Intergard 475HS at
 

A fact sheet containing data of a company s finances in the bible

Intergard 251 is designed for application to correctly prepared steel. However, it is also possible to apply over approved prefabrication primers, Further details of these can be obtained from International Protective Coatings. The following primers are recommended for Intergard 251: Interzinc 22 (mist coat or tie coat may be required ... The information in this data sheet is not intended to be exhaustive; any person using the product for any purpose other than that specifically recommended in this data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at their own risk. Download Intergard 345 - kemipaz.com.tr book pdf free download link or read online here in PDF. Read online Intergard 345 - kemipaz.com.tr book pdf free download link book now. All books are in clear copy here, and all files are secure so don't worry about it. Intergard 251 Primer. Intergard 251 primer, Epoxy for structural steelwork A two component epoxy anti-corrosive primer pigmented with zinc phosphate. Typical thickness: 50-75 microns dry, 79-119 microns wet Coverage: 8.40m²/litre at 75 microns d.f.t and stated volume solids

Product comparison tool Intergard 251 by International has no matching equivalent. ... but you should always read the technical data sheets for each product to be ... with Intergard 269 within the overcoating intervals specified for the primer (consult the relevant product data sheet). Ensure that the zinc primer has fully cured and is clean, dry and free from zinc salts prior to overcoating. Mixing Material is supplied in two containers as a unit. Always mix a complete unit in the proportions supplied. Intergard 251 should be kept in securely closed containers during transport and storage. Safety GENERAL: Users should ensure they have a copy of the Material Safety Datasheet for this product and that they are

Bishop mclaughlin football coach

The information in this data sheet is not intended to be exhaustive; any person using the product for any purpose other than that specifically recommended in this data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at their own risk. overcoated intervals specified (consult the relevant product data sheet) To avoid pinholing over zinc primed surfaces, Intergard 269 should be thinned by 15-25% with International GTA220. For tank coating projects, consult International Paint for the detailed tank coating procedures that should be followed.